J A Harrisons Mechanical Seal Division Now Offer Thermosyphon Systems

1 November 2011 @ 21:50 | Admin

J A Harrison’s Mechanical Seal Division now offer Thermosyphon systems. Thermosyphons enable a pressure barrier to be formed between the media being pumped and the double cartridge mechanical seal components. This is especially beneficial where the media is extremely viscous or abrasive.

 

 

J A Harrison recently installed on site a JAH 10 Litre Thermosyphon system manufactured in 304SS with a cooling coil in 316SS, and pressure gauge, an external pump can be supplied if required. This will aid the barrier fluid to be pumped around the system.

 

This system is used on a JAH special, pressure balanced vertical cartridge seal as designed by Mr Andrew Sykes, Technical Sales Manager of our Mechanical Seals Division.

Andrew says ‘the use of this technology is very effective in:

1. Removing heat generated by the seal faces and maintaining an acceptable temperature within the seal area
2. To increase the seal pressure to 1.5 bar above the system pressure this maintains a clean liquid going through the seal.’

 

 

For more information please contact Andrew on 0161 832 2282.